Julien
04-04-2010, 07:19 AM
I have a Antec HTPC case with iMON built in. I’m almost cretin the remote worked when I fist got it but never really used. Now I want to and can’t no matter how close/far/angle. I can use the remote to program a learning remote so the remote is working and sending out an IR signal (Learning remote won’t control HTPC either). Also when I unplug the USB connection (labeled RoHS) the iMON on screen remote indicator outline turns yellow. When I plug it back in it turns blue again (indicating it’s seeing the iMON hardware). So I’m stuck not being able to determine if it’s hardware or software.
If I turn the volume control on the case it changes the iMON volume/on screen indicator and the iMON Power/Standby and Timer settings also work.
Under iMON Manager-Settings-Remote Controller it has drop down selector for iMON PAD, iMON MINI and MCE Remote. Tried all 3. I have the OEM and it has VERIS at the top and the number RM200 on the lower right.
Are there any other settings I’m missing or need to enable/configure.
If I turn the volume control on the case it changes the iMON volume/on screen indicator and the iMON Power/Standby and Timer settings also work.
Under iMON Manager-Settings-Remote Controller it has drop down selector for iMON PAD, iMON MINI and MCE Remote. Tried all 3. I have the OEM and it has VERIS at the top and the number RM200 on the lower right.
Are there any other settings I’m missing or need to enable/configure.