RC Chatter

[jdingo75]

RESOLVED: It was a hardware problem. After replacing the IR recevier module, the problem disappeared and everything works now as expected.

-----------------------

I have a problem with the Philips RC197 and iMON (OrigenAE S10V) using Windows 7/32Bit and MCE:

The IR reciever regularly receives wrong commands when using the RC. e.g. when scrolling through the EPG with the cursor buttons on the RC, iMon recevies a "7" or "4" along with the desired command. This happens very often (every 5th to 10th time) and makes it almost impossible to use the RC. Sometimes the wrong commands are sent repeatedly until the input queue is filled up, e.g. with "44444444". I have tried both, 64 and 32 Bit versions of WIndows 7, and I have installed several versions of iMon, with no success. I have also tried several cabeling positions and USB ports to sort out possible overspeaking - no difference.

My configuration is:

PSU: Enermax PRO82+ 385W ATX 2.2
Mainboard: ASUS P5Q-EM G45 S775 mATX
CPU: Intel Core2Duo E7400 2,8GHz
RAM: 4GB, Kingston PC2-800 2048 KVR CL4 DDR2 HyperX-Kit
HDD: Western Digital Green 1TB
ODD: Sony BC-5600S BluRay
TV card: Digital Devices Cine S2 - Duale DVB-S2 HDTV
OS: Windows 7 Home Premium 32 Bit
BlueRay-Software: PowerDVD 9 Ultra

[kanostic]

I have a similar problem with a logitech Harmony one remote, I am running Win 7 32 ultimate edition. It's very annoying, I also have the issue when you press the okay button (enter key) it seems like it sticks. :mad: